Best Audio Interface for Podcasting (2026): 5 Picks Compared

Updated Oct 24, 2026 · By Jonah Mercer · Ranked from listed specifications · How we rank

As an Amazon Associate I earn from qualifying purchases. Buying through the Amazon links on this page costs you nothing extra. Full disclosure

The MAONO AME2 leads the best audio interface for podcasting search with 11 custom sound pads, XLR input with 48V phantom power and a 60dB mic gain range for XLR mics. For two hosts on one box, the MAONO E2 Gen2 adds dual XLR inputs, 8 sound effects and an 8-hour battery.

The picks at a glance

#	Pick	Product
1	Best Overall	MAONO AME2 Audio Interface Mixer	Check on Amazon
2	Runner-Up	MAONO E2 Gen2 Podcast Equipment Bundle Audio	Check on Amazon
3	Also Great	SINWE Live Sound Card Audio Mixer	Check on Amazon
4	Also Great	Brvomussy Podcast Equipment Bundle	Check on Amazon
5	Also Great	Hayner-Seek Podcast Equipment Bundle	Check on Amazon

Which one should you buy?

Podcasters who want 11 custom sound pads in the mix: MAONO AME2 Audio Interface Mixer See pick 1
Co-hosts who record two XLR mics at once: MAONO E2 Gen2 Podcast Equipment Bundle Audio See pick 2More picks: Best Audio Interface for XLR
Live streamers who run three phones to three platforms: SINWE Live Sound Card Audio Mixer See pick 3More picks: Best Audio Interface for Phone
Two-person shows that record on PC or smartphone: Brvomussy Podcast Equipment Bundle See pick 4More picks: Best Audio Interface for PC
Four-person podcasts that need a mic per host: Hayner-Seek Podcast Equipment Bundle See pick 5More picks: Best Audio Interface for Podcast

Want the full range? Best Audio Interface ranks the top audio interfaces for every buyer, or browse all 59 guides.

The 5 picks, ranked

1Best Overall

MAONO AME2 Audio Interface Mixer

Inputs not stated in the listing
Bit depth: 32-bit
48V phantom power
1-year warranty stated

9.8Spec score View on Amazon

It earns Best Overall with 11 custom sound pads, XLR input with 48V phantom power and up to 60dB of mic gain for podcast mics.

Who it suits

Podcasters who want 11 custom sound pads in the mix
XLR mic users who need 48V phantom power

Skip it if

You use a USB microphone
You need more than two mic inputs

The 10-channel mixer carries 11 custom sound pads: three record up to 60 seconds each with one-key looping, and eight record 20 seconds each. Each XLR mic input gets 3-level gain adjustment up to 60dB with 48V phantom power, plus a 32-bit chipset with DENOISE. Six reverb modes, 12-step auto-tune and sidechain, music-only and loopback switches round out the board. The package holds the interface, a USB A-C cable, two 3.5mm TRRS cables and a manual, with a 1-year warranty.

2Runner-Up

MAONO E2 Gen2 Podcast Equipment Bundle Audio

Inputs: 10
Max sample rate: 48 kHz
Bit depth not stated in the listing
1-year warranty stated

9.5Spec score View on Amazon

It holds Runner-Up with dual XLR inputs, 60dB preamps, 8 custom sound effects and loopback for one-computer streaming.

Who it suits

Co-hosts who record two XLR mics at once
Streamers who loop back computer audio on one machine

Skip it if

You need more than 48 kHz sample rate
You need more than two XLR inputs

Two XLR combo inputs feed low-noise preamps with up to 60dB of gain for dynamic mics. Eight customizable sound effect buttons take up to 20 seconds each, and six preset reverbs plus pitch-changing effects shape the show. The built-in 1500mA battery runs up to 8 hours, and USB-C plus 3.5mm ports connect phones and computers. It works with OBS, Discord, Zoom and Audacity on Windows and macOS.

3Also Great

SINWE Live Sound Card Audio Mixer

Inputs not stated in the listing
Bit depth: 24-bit
12 month warranty stated

9.2Spec score View on Amazon

It earns Also Great with 16 fixed background effects, 7 podcast modes, 4 voice-changer modes and Bluetooth accompaniment in a 0.9 lb card.

Who it suits

Live streamers who run three phones to three platforms
Podcasters who want 16 background effects on tap

Skip it if

You need to connect more than three phones
You want a battery-powered card

The F988 runs an imported DSP dual chip with a 120kHz sample rate and 24-bit depth, plus Bluetooth wireless accompaniment. It packs 16 fixed background effects, 7 podcast and recording modes, 4 voice-changer modes and 4 special functions for denoise, voice-over and internal play. It connects to Windows, Mac OS and smartphones, and links up to three phones for multi-platform live streams.

4Also Great

Brvomussy Podcast Equipment Bundle

Inputs: 2
Bit depth not stated in the listing
1-year warranty stated

9.2Spec score View on Amazon

It earns Also Great as a two-person kit with two condenser mics, boom arms, 10 sound effects and 4 voice variations in one box.

Who it suits

Two-person shows that record on PC or smartphone
Beginners who want boom arms and cables included

Skip it if

You need inputs for more than two people
You want dynamic mics in the kit

The kit holds a live sound card, two condenser microphones, two boom arms, shock holders, pop filters, foam caps, two XLR cables, a USB cable and two 3.5mm audio cables. The mixer produces 10 sound effects with reverb, treble and bass, plus 4 voice variations and 4 sound modes. It runs on battery power, works with smartphones, PCs and PlayStations, and carries a 1-year warranty.

5Also Great

Hayner-Seek Podcast Equipment Bundle

Inputs not stated in the listing
Bit depth not stated in the listing
90-day warranty stated

9.0Spec score View on Amazon

It earns Also Great as a four-person kit with four dynamic mics, dual USB-C, 8 custom sound effects and a 4000mAh battery.

Who it suits

Four-person podcasts that need a mic per host
Streamers who want 8 custom sound effects on the board

Skip it if

You need more than four mic inputs
You want a kit under 5 lb

The bundle includes four dynamic mics with stands, shock mounts and foam caps, two XLR cables and two XLR-to-3.5mm cables. The 4-channel interface runs dual USB-C for two devices at once, with 8 custom sound effects at 20 seconds each, 4 voice-change modes and 12 auto-tune settings. Noise reduction, loopback and sidechain ship on board, and the 4000mAh battery powers the set. It carries a 90-day manufacturer warranty.

Side by side

Product	Inputs	Mic preamps	Outputs	Max sample rate	Bit depth	48V phantom power	Software named	Weight	Warranty
MAONO AME2 Audio Interface Mixer	Not stated	Not stated	Not stated	Not stated	32-bit	Yes	Not stated	2.1 lb	1-year
MAONO E2 Gen2 Podcast Equipment Bundle Audio	10	Not stated	Not stated	48 kHz	Not stated	Not stated	Not stated	2 lb	1-year
SINWE Live Sound Card Audio Mixer	Not stated	Not stated	Not stated	Not stated	24-bit	Not stated	Not stated	0.9 lb	12 month
Brvomussy Podcast Equipment Bundle	2	Not stated	Not stated	Not stated	Not stated	Not stated	Not stated	Not stated	1-year
Hayner-Seek Podcast Equipment Bundle	Not stated	Not stated	Not stated	Not stated	Not stated	Not stated	Not stated	6 lb	90-day

How we ranked these audio interfaces

Every pick has at least 100 customer ratings on Amazon and a listing with real specifications. The order mixes two things: how each model compares on the specs below (higher share of the best value in this group scores more), and how widely it is bought. The spec score runs from 9.0 to 9.8 and only compares these picks with each other. A spec the listing does not state is left out and the other specs are re-weighted; a listing with fewer than 2 stated specs is scored at half. We do not test gear in person. Full method.

Inputs weight 3
Mic preamps weight 2
Outputs weight 1
Max sample rate weight 2
Bit depth weight 1
48V phantom power weight 2

Buying advice: audio interface for podcasting

Count the mics and hosts first

Every host needs a mic input, so count people before you buy. The Hayner-Seek M100 runs four mics for four-person shows, the Brvomussy kit runs two condenser mics for duos, and the MAONO E2 Gen2 takes two XLR mics for co-hosts. The MAONO AME2 takes two XLR mics, and the SINWE F988 takes mic input over XLR or 3.5mm. Match the input count to your show.

Check phantom power and gain for your mics

Condenser mics need 48V phantom power, while dynamic mics need enough gain. The MAONO AME2 lists 48V phantom power with gain up to 60dB for XLR mics, and the MAONO E2 Gen2 gives two preamps with up to 60dB of gain. The Brvomussy kit ships condenser mics with its mixer, and the Hayner-Seek ships four dynamic mics. Check your mic type before you pick the interface.

Look at sound pads, effects and battery

Pads and effects shape the show. The MAONO AME2 gives 11 custom sound pads with 60-second and 20-second recording slots, the E2 Gen2 gives 8 sound effect buttons, and the Hayner-Seek gives 8 custom effects plus 15 sound effects. For power, the E2 Gen2 battery runs up to 8 hours and the Hayner-Seek carries a 4000mAh battery, while the AME2 runs corded. Pick the fun features and the runtime your format needs.

Frequently asked questions

What is the best audio interface for podcasting?

The MAONO AME2 leads with 11 custom sound pads, XLR input with 48V phantom power and up to 60dB of mic gain. For two hosts, the MAONO E2 Gen2 adds dual XLR inputs, 8 sound effects and an 8-hour battery.

Which bundle is best for two podcast hosts?

The Brvomussy kit is built for two: two condenser mics, two boom arms and a mixer with 10 sound effects in one box. The MAONO E2 Gen2 suits co-hosts with dual XLR inputs and 60dB preamps, and the Hayner-Seek covers four hosts.

Can I record instruments with these interfaces?

Yes. The MAONO AME2 has a 6.35mm instrument input for guitar or bass, and the Hayner-Seek has a 6.35mm jack for electric guitar, bass and keyboard. The Brvomussy mixer also takes instrument input for live streams and recording.

Do these podcast interfaces work with phones?

Yes. The MAONO AME2 connects smartphones over Bluetooth, AUX-IN and LIVE-OUTPUT1/2, and the E2 Gen2 connects phones over Bluetooth, AUX-IN and USB-C. The SINWE links up to three phones for multi-platform streaming, and the Brvomussy works with smartphones, PCs and PlayStations.