Best Pop Filter for Sm58 (2026): 4 Picks Compared
Updated Nov 11, 2026 · By 
Jonah Mercer · Ranked from listed specifications · How we rank
As an Amazon Associate I earn from qualifying purchases. Buying through the Amazon links on this page costs you nothing extra. Full disclosure
The LEFXMOPHY 3-pack leads for the SM58: a foam windscreen in the original shape that stops plosives, pop, breath and wind noise. The WIBOND 2-pack follows as Runner-Up with thick foam sized 2.76 by 2.5 inches, while the ChromLives pack holds 6 covers.
The picks at a glance
Which one should you buy?
- Vocalists who want a windscreen shaped like the original: LEFXMOPHY SM58 Windscreen See pick 1
- Singers who want thick foam that reduces wind noise: WIBOND Foam Mic Cover See pick 2
- Vocalists who want 6 foam covers for the SM58: ChromLives Windscreen for SM58 See pick 3
- Singers who want a thick foam cover for the SM58: YOUSHARES SM58 Pop Filter Compatible with Shure SM58 See pick 4
Want the full range? Best Pop Filter ranks the top pop filters for every buyer, or browse all 33 guides.
The 4 picks, ranked
1Best Overall
It earns Best Overall as a 3-pack foam windscreen shaped like the original SM58 cover, stopping plosives, pop, breath and wind noise.
Who it suits
- Vocalists who want a windscreen shaped like the original
- Singers who want a washable foam cover for the SM58
Skip it if
- You need a gooseneck pop filter on a stand
- You want a 6-pack
The 3-pack fits Shure SM58, SM48, 565SD, Pgx2, Slx2, BETA58, SM58LC, Beta 58A, PG48 and PG58 microphones. It snaps onto the mic and stops plosives, pop, breath and wind noise, and it keeps slip, dust and moisture off the mic. The foam is washable and high elastic, and it returns to its shape after washing with water.
2Runner-Up
It earns Runner-Up as a thick 2-pack foam cover for the SM58, sized 2.76 by 2.5 inches with a 1.4-inch caliber.
Who it suits
- Singers who want thick foam that reduces wind noise
- Stage performers who want a washable cover for shared mics
Skip it if
- You need a cover for a headset microphone
- You want a 6-pack
The 2-pack is thick, soft foam that slips over the mic head and fits ball-type handheld dynamic microphones. It measures 2.76 by 2.5 inches with a 1.4-inch caliber, and it reduces wind noise and harsh plosives. It is washable, and it returns to shape after sitting upright for 6 to 12 hours or soaking in water for at least 30 minutes.
3Also Great
It earns Also Great as a 6-pack foam cover for the SM58, sized 2.3 by 3.1 inches with a 1.4-inch caliber.
Who it suits
- Vocalists who want 6 foam covers for the SM58
- Podcasters who want a cover that reduces pops and ticks
Skip it if
- You want a cover sized 2.76 by 2.5 inches
- You need a gooseneck pop filter on a stand
The 6-pack is high density foam sized 2.3 by 3.1 inches with a 1.4-inch caliber, shaped like the original SM58 cover. It fits Shure SM48, SM58, 565SD, Pgx2, Slx2, BETA58, SM58LC, Beta 58A, PG48 and PG58 microphones. It reduces breath, wind noise, pops and ticks, and it keeps slips, dust and moisture off the mic.
4Also Great
It earns Also Great as a 2-pack foam cover for the SM58, with acoustically transparent foam that reduces pops and ticks.
Who it suits
- Singers who want a thick foam cover for the SM58
- Vocalists who want a cover that saves space on the mic
Skip it if
- You need a gooseneck pop filter on a stand
- You want a 6-pack
The 2-pack is a foam windscreen cover made for the SM58, in the style of the A58WS foam windscreen. Its acoustically transparent foam reduces breath and wind noise, pops and ticks, and it keeps dust and saliva off the mic. It fits PGA48-XLR, PGA48, SM58, Beta58A, SM48, SM58-S and SM58-CN ball type mics.
Side by side
| Product | Dual layer screen | Metal mesh | Gooseneck | Weight | Warranty |
|---|---|---|---|---|---|
| LEFXMOPHY SM58 Windscreen | Not stated | Not stated | Not stated | Not stated | Not stated |
| WIBOND Foam Mic Cover | Not stated | Not stated | Not stated | Not stated | Not stated |
| ChromLives Windscreen for SM58 | Not stated | Not stated | Not stated | Not stated | Not stated |
| YOUSHARES SM58 Pop Filter Compatible with Shure SM58 | Not stated | Not stated | Not stated | Not stated | Not stated |
How we ranked these pop filters
Every pick ranks in Amazon's best-seller list for its category and has a listing with real specifications. The order mixes two things: how each model compares on the specs below (higher share of the best value in this group scores more), and how widely it is bought. The spec score runs from 9.0 to 9.8 and only compares these picks with each other. A spec the listing does not state is left out and the other specs are re-weighted; a listing with fewer than 2 stated specs is scored at half. We do not test gear in person. Full method.
- Dual layer screen weight 2
- Metal mesh weight 1
- Gooseneck weight 1
Buying advice: pop filter for sm58
Fit the cover to the SM58 head
A foam cover must slip over the ball head of the SM58 and stay put. The LEFXMOPHY, ChromLives and YOUSHARES covers are shaped for the SM58, and the WIBOND cover measures 2.76 by 2.5 inches with a 1.4-inch caliber. Check the caliber against the mic head before you buy.
Pick the pack size you need
Foam covers wear out and get shared, so the pack size matters. The ChromLives pack holds 6 covers, the LEFXMOPHY pack holds 3, and the WIBOND pack and the YOUSHARES pack hold 2 covers. Buy the pack that matches how many mics you cover.
Wash the foam to restore its shape
Foam covers can arrive squeezed flat from transit packaging. The LEFXMOPHY cover returns to its shape after washing with water, and the WIBOND cover returns to shape after sitting upright for 6 to 12 hours or soaking in water for at least 30 minutes. Let the foam air dry before you use it.
Frequently asked questions
Do I need a pop filter for an SM58?
A foam windscreen on the SM58 stops plosives, pop, breath and wind noise, and it keeps dust, moisture and saliva off the mic. The LEFXMOPHY, WIBOND, ChromLives and YOUSHARES covers all fit the SM58.
How do I wash a foam mic cover?
The LEFXMOPHY foam is washable and returns to its shape after washing with water. The WIBOND foam is washable too, and it returns to shape after sitting upright for 6 to 12 hours or soaking in water for at least 30 minutes.
Will a foam cover fit other Shure mics?
The LEFXMOPHY cover fits SM48, 565SD, Pgx2, Slx2, BETA58, SM58LC, Beta 58A, PG48 and PG58 microphones. The ChromLives cover fits SM48, 565SD, Pgx2, Slx2, BETA58, SM58LC, Beta 58A, PG48 and PG58 microphones too. The YOUSHARES cover fits Beta58A, SM48 and SM58-S mics.
What size is a foam cover for the SM58?
The WIBOND cover measures 2.76 by 2.5 inches with a 1.4-inch caliber, and the ChromLives cover measures 2.3 by 3.1 inches with a 1.4-inch caliber. The 2 covers fit the SM58 ball head.
Gear that goes with it
Best Condenser MicTop pick: Rode RØDE NT1 Signature Series Studio Condenser Microphone
Best USB MicTop pick: InnoGear Gaming Mic USB Computer Microphone
Best Mic ArmTop pick: FIFINE BM88W Low Profile Mic Boom ArmMore pop filters guides
Specifications and availability come from each Amazon listing on Nov 11, 2026 and can change. Check the listing before you buy.