Best Microphone Stand for Podium (2026): 5 Picks Compared
Updated Nov 11, 2026 · By 
Jonah Mercer · Ranked from listed specifications · How we rank
As an Amazon Associate I earn from qualifying purchases. Buying through the Amazon links on this page costs you nothing extra. Full disclosure
The Etour 19-inch gooseneck stand leads this list as Best Overall: a 19-inch arm that holds up to 2.5 lb, a flange base that screws to a podium or desk, and a mic clip in the box. The Angksorm KF25 follows with a 13-inch arm, while the Borenbuir is the lightest pick at 0.5 lb.
The picks at a glance
Which one should you buy?
- Speakers who want a fixed flange mount on a podium: Etour 19-Inch Gooseneck Microphone Stand See pick 1
- Speakers who want a short arm over a small lectern: Angksorm KF25 13-Inch Heavy-Duty Gooseneck Mic Stand See pick 2More picks: Best Small Microphone Stand
- Desk users who want a clamp mount with no screws: ROCKFREE Microphone Stand With Desk Clamp See pick 3More picks: Best Mic Stand for Desk
- Desk users who want a clamp mount up to 2.3 inches thick: Borenbuir 19“ Gooseneck Microphone Stand for Desk See pick 4More picks: Best Desk Microphone Stand
- Speakers who want a weighted base with no screws: Angksorm 13-Inch Desktop Gooseneck Microphone Stand See pick 5More picks: Best Weighted Microphone Stand
Want the full range? Best Microphone Stand ranks the top microphone stands for every buyer, or browse all 60 guides.
The 5 picks, ranked
1Best Overall
Etour 19-Inch Gooseneck Microphone Stand
- Mic clip included
- Base: Desktop
- 2-year warranty stated
It earns Best Overall with a 19-inch arm, a 2.5 lb load limit, a flange base for a podium or desk, and a mic clip in the box.
Who it suits
- Speakers who want a fixed flange mount on a podium
- Lecturers who need a 19-inch arm that bends to angle
Skip it if
- You need to hold a microphone over 2.5 lb
- You need a clamp mount for a desk edge
The box holds the 19-inch gooseneck, a mic clip that adjusts 180 degrees, a flange mount with a non-slip pad, a locking ring, an adapter, cable ties, screws and wall anchors. The arm uses 5/8-inch male and female threads with a 5/8-inch to 3/8-inch adapter. It weighs 1 lb and carries a 2-year warranty.
2Runner-Up
Angksorm KF25 13-Inch Heavy-Duty Gooseneck Mic Stand
- Mic clip included
- Base: Desk
- 1-year warranty stated
It holds the Runner-Up spot with a 13-inch arm, a 3.2 lb load limit, and a 2-inch flange base that screws to a podium.
Who it suits
- Speakers who want a short arm over a small lectern
- Podium users who need a 3.2 lb load limit
Skip it if
- You need to hold a microphone over 3.2 lb
- You need a weighted base with no screws
The kit holds the 13-inch gooseneck arm, a flange mount base, a mic clip holder, a 5/8-to-3/8 adapter and 10 cable ties. The arm is about 0.6 inches thick and bends to direct the mic toward a speaker. It weighs 0.7 lb and carries a 1-year warranty.
3Also Great
It earns Also Great with an 8-inch arm, a clamp mount, two mic clips and a 1.65 lb load limit.
Who it suits
- Desk users who want a clamp mount with no screws
- Speakers who switch between standard and large mics
Skip it if
- You need to hold a microphone over 1.65 lb
- You need an arm longer than 8 inches
The box holds the 8-inch gooseneck arm, a desk clamp with silicone pads, a standard mic clip, a large mic clip, and 3/8-inch and 5/8-inch adapters. The 360-degree rotating base and 180-degree mic clip set the angle. It weighs 1.1 lb and supports up to 1.65 lb.
4Lightest Pick
Borenbuir 19“ Gooseneck Microphone Stand for Desk
- Mic clip included
- Base: Desk
- 2-year warranty stated
- 0.5 lb, the lightest here
At 0.5 lb it is the lightest pick here, with a 19-inch arm, a desk clamp and two mic clips.
Who it suits
- Desk users who want a clamp mount up to 2.3 inches thick
- Speakers who need a 19-inch arm over a monitor
Skip it if
- You need to hold a microphone over 2.5 lb
- You need a flange mount screwed to a podium
The box holds the 19-inch gooseneck arm, a desktop clamp, a dynamic mic holder, a condenser mic holder, two adapters, a lock ring and cable ties. The clamp grips tabletops up to 2.3 inches thick and has a soft rubber pad. It weighs 0.5 lb and carries a 2-year warranty.
5Also Great
Angksorm 13-Inch Desktop Gooseneck Microphone Stand
- Mic clip included
- Base: Desktop
- 1-year warranty stated
It earns Also Great with a 13-inch arm, a 1.32 lb weighted base and a 5 lb load limit.
Who it suits
- Speakers who want a weighted base with no screws
- Church speakers who need a 13-inch arm on a desk
Skip it if
- You need to hold a microphone over 5 lb
- You need a clamp mount for a desk edge
The box holds the metal base, the 13-inch gooseneck arm, a mic clip and two thread adapters. The base measures 6.3 by 7.9 inches and has a 3 mm pad on the underside. The arm uses 5/8-inch threads with adapters for 3/8-inch and 1/4-inch mounts. It weighs 1.5 lb and carries a 1-year warranty.
Side by side
| Product | Boom arm | Mic clip included | Folds for transport | Base | Weight | Warranty |
|---|---|---|---|---|---|---|
| Etour 19-Inch Gooseneck Microphone Stand | Not stated | Yes | Not stated | Desktop | 1 lb | 2-year |
| Angksorm KF25 13-Inch Heavy-Duty Gooseneck Mic Stand | Not stated | Yes | Not stated | Desk | 0.7 lb | 1-year |
| ROCKFREE Microphone Stand With Desk Clamp | Not stated | Yes | Not stated | Desk | 1.1 lb | Not stated |
| Borenbuir 19“ Gooseneck Microphone Stand for Desk | Not stated | Yes | Not stated | Desk | 0.5 lb | 2-year |
| Angksorm 13-Inch Desktop Gooseneck Microphone Stand | Not stated | Yes | Not stated | Desktop | 1.5 lb | 1-year |
How we ranked these microphone stands
Every pick ranks in Amazon's best-seller list for its category and has a listing with real specifications. The order mixes two things: how each model compares on the specs below (higher share of the best value in this group scores more), and how widely it is bought. The spec score runs from 9.0 to 9.8 and only compares these picks with each other. A spec the listing does not state is left out and the other specs are re-weighted; a listing with fewer than 2 stated specs is scored at half. We do not test gear in person. Full method.
- Boom arm weight 1
- Mic clip included weight 1
- Folds for transport weight 1
Buying advice: microphone stand for podium
Match the mount to the podium
A flange base screws into the surface and stays put, so the Etour and the Angksorm KF25 suit a podium you own and can drill into. A clamp grips a desk edge with no screws, so the ROCKFREE and the Borenbuir suit a shared desk. A weighted base needs no fasteners at all, so the Angksorm weighted stand suits a lectern you cannot drill into. Pick the mount first, then check the arm length.
Check arm length and load limit
Arm length decides how far the mic reaches over a podium, and the load limit decides which mics the arm holds. The Etour and the Borenbuir span 19 inches and hold up to 2.5 lb. The Angksorm KF25 and the Angksorm weighted stand span 13 inches, with limits of 3.2 lb and 5 lb. The ROCKFREE spans 8 inches and holds up to 1.65 lb. Measure the distance from the mount to the speaker, then match it to the arm and the mic weight.
Check the thread size before buying
Microphones and shock mounts use standard threads, and each stand here uses 5/8-inch threads with adapters in the box. The Etour and the Angksorm KF25 include a 5/8-inch to 3/8-inch adapter. The ROCKFREE includes 3/8-inch and 5/8-inch adapters. The Borenbuir and the Angksorm weighted stand include adapters for 3/8-inch and 1/4-inch mounts. Confirm the thread on your mic or shock mount, then pick the stand with the matching adapter.
Frequently asked questions
Will these stands fit a standard microphone clip?
Yes. Each stand uses 5/8-inch threads, and each includes a mic clip in the box. The Etour, Angksorm KF25, ROCKFREE, Borenbuir and Angksorm weighted stand each ship with at least one clip and an adapter for 3/8-inch mounts.
Do I need to drill holes to mount one?
It depends on the mount. The Etour and the Angksorm KF25 use a flange base that fastens with screws, while the ROCKFREE and the Borenbuir clamp to a desk edge. The Angksorm weighted stand sits on the surface with no fasteners.
How heavy a microphone can these stands hold?
The Angksorm weighted stand holds up to 5 lb, the Angksorm KF25 up to 3.2 lb, the Etour and the Borenbuir up to 2.5 lb, and the ROCKFREE up to 1.65 lb. Check your microphone weight against the limit before buying.
Which stand works best for a podium?
The Etour leads for a podium with its 19-inch arm and flange base that screws to the surface, and the Angksorm KF25 is the shorter 13-inch option with the same flange mount. The Angksorm weighted stand is the choice when you cannot fasten anything to the podium.
Gear that goes with it
Best Dynamic MicrophoneTop pick: Audio-Technica AT2040 Hypercardioid Dynamic Podcast Microphone Hypercardioid
Best Wireless MicTop pick: Bietrun Wireless Microphone Headset
Best XLR CableTop pick: Cable Matters 2-Pack Premium XLR to XLRMore microphone stands guides
Specifications and availability come from each Amazon listing on Nov 11, 2026 and can change. Check the listing before you buy.